Analog Way OPS300 - Manual (Page 25)

COMPONENT VIDEO SOURCES:
The Component Video signal, also called YUV (Y, Pr, Pb)
or BETACAM™ is widely used in broadcasting and is
available on high-quality DVD players. The COMPONENT
signal is transmitted with 3 coaxial cables, and also has
a better quality picture than COMPOSITE and S.VIDEO
signals. The COMPONENT connectors are usually RCA
(x3), or BNC (x3).For inputs #5 to #8: connect a HD15 to
3 x BNC cable between the HD15 connector of the device
and your Component source.
RGBS VIDEO SOURCES:
This signal is widely used in broadcasting and is available
on European DVD player. The RGB/S signal is transmitted
with 4 coaxial cables, and also has a better picture quality
than COMPOSITE and S.VIDEO signals. The RGB/S
connectors are usually BNC connectors for Broadcasting
equipment, and SCART connector for DVD players.
For inputs #1 to #5 and #8: connect a HD15 to 4 x BNC
cable between the HD15 connector of the device and your
RGB/S source.
PREVIEW OUTPUT:
ANALOG: 1 x analog output for the main display
device on female HD15 connector.
DIGITAL/ANALOG: 1 x main output on female DVI-I
connector (simultaneous analog and
digital).
DVI AND ANALOG SOURCES:
DVI Inputs #1- #2 on the OPS300 accept up to 2 live sources
in Digital format.
DVI-I: 1 x digital (DVI) and 1 x analog input on
female DVI-I universal connector.
SD/HD-SDI SOURCES:
SD/HD-SDI Inputs #1- #2 on the OPS300 accept up to 2 live
sources in Digital formats.
SD/HD-SDI: 1 x digital input on female BNC connector.
G B S R
RGBS Source
DVI Inputs #1 - #2
Digital & Analog Computer Sources
DVI-D
SD/HD-SDI Inputs #1 - #2
Preview Outputs
23
HD/SDI Source
BNC
G B R
Component (YUV) Source