Analog Way OPS300 - Manual (Page 64)

62
The RCS software for your OPS300 can be viewed as the software version of the OPS300 front panel menu
section. It allows you to quickly access all of the OPS300 functions via a single page interface, and easily edit
your settings directly from your laptop or PC.
Before starting with the RCS software, you must establish a connection from your laptop to the OPS300 you
wish to run.
The RCS software for your OPS300 is composed of several easily identified sections.
The tabs menu (1) allows you to navigate through the equivalent of the OPS300 front panel menu items (see
also “The OPS300 Menu” p.28).
The green window of the RCS (2) represents your Preview window and can be used to parameter sources,
frames, layers and logos directly by clicking on the corresponding button, then navigating through the different
available tabs. The red window of the RCS (3) represents your Main window, and can also be used much like
the front panel of the
OPS300 . Create user presets directly in the RCS main window, by clicking on one of
the four available Preset icons (4) and setting up your preset in the Preview window.
Clear unwanted steps with the clear button (5), reload a fresh copy of your screen via the Reload Main
button (6), make smooth takes directly with your mouse or trackpad with the virtual T-bar (7). The Take
button (9) will allow you to view any changes made to your preview screen on your main screen, Analog Way
engineers have even implemented a Stepback button (8) to quickly return to your previous setup in case of a
manipulation error (recall of Preset before Take).
The status section (10) allows for easy monitoring of the connection status.
Software overview
1
2
3
4
5
6
7
8
10
9