Analog Way Smart Vu - Manual (Page 29)

1/ In the MENU section, press the EXIT/MENU button and select
Input in the menu by rotating the scroll knob. Then press the ENTER
button to enter the Input sub-menu.
2/ In the Input menu, select the type of input you have plugged into
the Smart Vu by rotating the scroll knob (see Input Specifications,
p.14). Then press the ENTER button to enter the types of inputs
connected to the Smart Vu .
3/ Press the EXIT/MENU button to return to the main menu.
4/ Repeat steps 1-3 for every source connected to your Smart Vu .
Once your inputs have all been configured, the output settings of
the Smart Vu must be set according to the machines plugged on
your Smart Vu main and preview outputs (video projector, preview
monitor...).
* NOTE * : It is strongly recommended to set the output format of
the SVU300 to match the native resolution of the display devices
connected to the SVU300.
1/ In the Menu section, press the EXIT/MENU button and select
Output in the menu by rotating the scroll knob. Then press the
ENTER button to enter the Output sub-menu.
2/ In the Output menu, select the output type, resolution and
frequency, to match the viewing hardware plugged into the Smart
Vu , by rotating the scroll knob (see also Output Specifications
p.16). Then press the ENTER button to enter each of the output
parameters.
* NOTE * : be sure to press the ENTER button to confirm every
selected setting, the Smart Vu, will revert to its original settings if
new choices are not confirmed.
3/ Press the EXIT/MENU button to return to the main menu.
Input selection settings
Source output selection
Output selection settings
28