Analog Way Smart Vu - Manual (Page 47)

46
Working with presets
Working with audio
The four Smart Vu user presets can be called back at any stage
during your show or event.
1/ Click one of the four available Preset buttons to choose which
memory you wish to use. Select Load to Preview from the dropdown
menu, your preset will appear on the Preview screen.
2/ Once you have selected your preset, simply click the Take button
to view the result on your main screen.
The Smart Vu allows to work with up to 5 stereo inputs, 1 auxiliary
input, and 2 embedded SDI audio inputs (via the SDI BNC
connectors), all accessible via the Audio menu of the Smart Vu , and
which can be affected to one or both of the 2 independant symetrical/
asymetrical outputs of the device.
To configure audio settings of the Smart Vu , plug all audio inputs
into the device, and click on the Audio tab of the RCS home page.
1/ Set the Main audio output level and delay (accessible only if Delay
Mode is set to Manual Adjust, see also the “Audio Configuration”
chapter, page 40), or click the Mute button to mute Main audio
output.
2/ Repeat step 2 for the Prelist audio output.
3/ Individual source settings (level and balance) for each audio input
can be configured in the right hand section of the Audio tab.
Audio Configuration