Analog Way Smart Vu - Manual (Page 31)

It is possible to store up to 4 frames in the Smart Vu non volatile
memory with the optional Logo/Frame upgrade installed. Frames
are mainly used as backgrounds in a typical show or event setup,
and can be recorded from any of the Smart Vu ’ 7 sources and called
back at the press of a single button.
* NOTE * : Frames may be used only one at a time and cannot be
placed in a layer.
1/ In the Input Selection section, press the source button (1-4) of the
source you wish to record as a frame. The source button will start
blinking. Press the TAKE button to display that source on the main
display.
2/ Select Logos/Frames in the menu by rotating the scroll knob, then
pressing the ENTER button.
3/ Select Record Frames in the Logo/Frames menu by rotating
the scroll knob, then pressing the ENTER button. A white rectangle
will appear on your main display, indicating the frame which will
be captured. Select an empty frame memory (empty frames
are indicated in the sub-menu) to store the frame into. Press the
corresponding ENTER button.
4/ The Smart Vu will display a progress status bar on the VFD
screen. Your frame is stored when the menu reappears on the VFD
screen.
5/ Press the BACKGROUND FRAME button, select the frame
number (1-4) you just recorded, and press the TAKE button. Your
background frame will appear on your preview output.
* NOTE * : The Background Frame is the deepest Layer and is
behind any other Layer. The Background Frame may be hiden by
the Background Live source.
Working with Frames
Memorizing Frames
Working with logos
It is possible to store up to 4 logos in the Smart Vu non volatile
memory.These can be recorded from any of the Smart Vu ’ 7
sources. Logos have many more attributes than frames. They can
be sized, positionned, but also keyed via color cutout selection or
luma key.
* NOTE * : available only on SmartVu with the Logo/Frame option
installed.
30