Analog Way Smart Vu LE User Manual

Page 11

Advertising
background image

Tabletop mounting: the

Smart Vu LE

can be used directly on a table, the unit is equipped with 4 handy anti-

slip rubber feet.

Rack mounting: the

Smart Vu LE

is compatible with a 19” enclosure. Please follow the instructions below to

install the device in a 19” rack.

Place the device in your rack. Attach the device to the rack by using 4 screws through the front panel holes

(screws not included).

Rear fixing is also recommended, in particular for permanent installations. The

Smart Vu LE

is equipped with

drill holes designed for compatibility with most rackmount braces.

Connect all of the cables of the device and attach them to the rack with the help of tie wraps.

IMPORTANT:

-

The openings in the side and rear panels of the device are for cooling. Do not cover these openings to

avoid cutting air circulation.

-

Be sure that no weight in excess of 2 kg (4.4 Lbs.) is added onto the

Smart Vu LE

.

-

The maximum ambient operating temperature should not exceed 40 °C (104°F)

-

The rack and all mounted equipement in it must be reliably grounded according to national and/or local

electrical standards.

2-2. UNPACKING AND INSPECTION

2-3. RACKMOUNT INFORMATION

!

Dismantling front handles of the device could invalidate warranty on after sales services of your

Smart Vu LE. It is strongly advised to avoid using front handles as rests for your Smart Vu LE,

they are designed for manipulation purposes only.

If required, front handles of the device can be dismantled, but with caution.The original screws removed

must not be reintroduced to their location without handles in place. Substancial damages can occur,

including risk of electric shock from the main voltage. Only M4x12mm screws can be used. They are

supplied with the unit.

10

1 x

Smart Vu LE

seamless scaler/switcher

1 x Power supply cord

1 x HD15 to 5 BNC cable

1 x Ethernet cross cable (for device update)

1 x Set of 3 audio 5 pin screw terminals
1 x RCS - Remote Control Software - (PC only) *

1 x User manual

(PDF version) *

1 x Quick Start

Guide (PDF version) *

* Download on our website:

www.analogway.com/

Advertising