Analog Way Smart Vu LE - Manual (Page 25)

The Freeze button of the Smart Vu LE allows users to freeze the Main output current display or the active
layer, depending on the freeze mode: Freeze All, freezes all visible layers, Layer Freeze, to freeze the current
selected layer.
The Fade button of the Smart Vu LE is a front panel shortcut to the Layer menu, where it is then
possible to set transition settings for the chosen source.
The Smart Vu LE PRESET SELECTION button is a practical front
panel shortcut to the SmartVu Preset menu, and will activate the four
available Preset Memories (Input Selection section buttons 1-4).
The Smart Vu LE TAKE button allows to switch from Preview to
Main outputs. By pressing the TAKE button, what you have setup on
your preview screen will go live on the Main output display.
Freeze button
Fade button
Preset Selection button
Take button
24