Analog Way Smart Vu LE - Manual (Page 28)

1/ In the MENU section, press the EXIT/MENU button and select Input in the menu by rotating the scroll knob.
Then press the ENTER button to enter the Input sub-menu.
2/ In the Input menu, select the type of input you have plugged into the Smart Vu LE by rotating the scroll
knob (see Input Specifications). Then press the ENTER button to enter the types of inputs connected to the
Smart Vu LE.
3/ Press the EXIT/MENU button to return to the main menu.
4/ Repeat steps 1-3 for every source connected to your Smart Vu LE .
Once your inputs have all been configured, the output settings of the Smart Vu LE must be set according to
the machines plugged on your Smart Vu LE main output (video projector, preview monitor...).
* NOTE * : It is strongly recommended to set the output format of the Smart Vu LE to match the native
resolution of the display devices connected to the Smart Vu LE.
1/ In the Menu section, press the EXIT/MENU button and select Output in the menu by rotating the scroll
knob. Then press the ENTER button to enter the Output sub-menu.
2/ In the Output menu, select the output type, resolution and frequency, to match the viewing hardware
plugged into the Smart Vu LE , by rotating the scroll knob (see also Output Specifications p.14). Then press
the ENTER button to enter each of the output parameters.
* NOTE * : be sure to press the ENTER button to confirm every selected setting, the Smart Vu LE, will revert
to its original settings if new choices are not confirmed.
3/ Press the EXIT/MENU button to return to the main menu.
Input selection settings
Source output selection
Output selection settings
27