Analog Way Smart MatriX User Manual
Page 40
2- Clone mode:
The output #1 and #2 will be the same. All changes on the output #1 will be affected to the
output #2. Layers will have the same position and size.
For the ❶, ❷, ❸ & ❹ modes:
Red case:
Mirror Mode activated only for the PIP layer
Blue case:
Mirror Mode activated for PIP layer and Background live Layer
Using the Matrix Mode, several configuration are available, the Simple Mode and the Mirror Mode.
Using the Mirror Mode:
OUTPUT #1
OUTPUT #1
OUTPUT #2
OUTPUT #2
Select the chosen layer and go in the layer menu, then select the “Layer Copy Mode” menu.
There are several mirror positioning options:
To use the Mirror Mode, simply select the Matrix Mode through the Main menu, then the Mirror Mode can be
activated layer by layer thanks to the layers menu.
1- No Copy:
this mode is the standard matrix mode, output
#
1 and
#
2 are independent...
❶
❷
OUTPUT #1
OUTPUT #1
OUTPUT #2
OUTPUT #2
38