Analog Way Smart MatriX - Manual (Page 62)

Working with PIPs
The Smart MatriX allows users to manipulate 2 PIPs (Picture In Picture) which you can move, size, crop or
zoom, apply transparency or transitions to.
PIP configuration
1. Click on the Image tab of the RCS interface. The empty Image
screen will appear on screen.
2. By clicking on the drop-down menu in the Preview section,
situated next to the layer you wish to use as a PIP, you will
access the image parameters of the PIP source you select
( # 1 to # 12).
3. Set the desired PIP attributes (size, position, zoom, border,
transparency...).
4. Click on the Image tab to return to the main screen.
Working with Frames
It is possible to store up to 8 frames in the Smart MatriX non volatile
memory. Frames are mainly used as backgrounds in a typical show
or event setup, and can be recorded from any of the 8
Smart MatriX
sources and called back at the click of a single button.
* NOTE * : To memorize a frame, select an input, and take it to the
Main screen. Once the frame is displayed on your Main output, it is
then possible to store it to the
Smart MatriX non volatile memory.
* NOTE * : Frames may be used only one at a time. A frame may not
be used as a Live Background.
60