Analog Way Smart MatriX User Manual
Page 63
Memorizing Frames
1. In
the
Input
Selection
section,
click on the source button
(
#
1 to
#
12) of the source you wish to record as
a frame.
2. Click on the Logos/Frames tab of the RCS
interface. Then click on the Record Frame button.
3. Click on the field next to the first free Frame to
select it.
4. Click on the Execute button.
Working with Logos
It is possible to store up to 8 logos in the
Smart MatriX non volatile memory. Logos work in much the same
way as frames, and can be recorded from any of the
Smart MatriX’ 12 sources.
Logos have more attributes than frames. They can be sized, positionned, but also keyed via color cutout
selection or Luma Key.
Memorizing Logos
1. In the Input Selection section, click on the source
button (
#
1 to
#
12) of the source you wish to record
as a logo.
2. In the Logos/Frames tab, click Record Logo, then
select an empty logo memory slot (
#
1 to
#
8) to
record your logo into.
3. Adjust position, size and keying attributes for your
logo.
4. Click on Execute to record your logo into the
selected memory slot. The
Smart MatriX RCS will
display a progress bar while recording the logo.
5. In the Input Selection section, click the LOGO1 button, and select logo number (
#
1 to
#
8) you wish to use.
Your logo will appear on the preview screen above any existing layer on screen.
6. Click on the TAKE button. Your logo will appear on the main display.
61