Analog Way Smart MatriX - Manual (Page 41)

OUTPUT #1 OUTPUT #1 OUTPUT #2 OUTPUT #2
4- Copy&H.Flip all modes: the output #2 will be exactly the same as the output #1 except the fact that the
selected layer will have its H position and data flipped.
*NOTE*: Remember that to simplify the use of this feature, you need to manipulate the Output #1. While in
mirror mode, the Output #2 will follow the desired steps.
*NOTE*: Every change on the Output #2 will have an effect only on the Output #2, but remember that if a
change occurs on the Output #1 after that, the Output #2 will update automatically to match output #1 (in
mode 2/3/4).
❹
OUTPUT #1 OUTPUT #1 OUTPUT #2 OUTPUT #2
3- Copy & H.pos Flip mode: the output #2 will be exactly the same as the output #1 except the fact that the
selected layer will have its H position flipped (standard Mirror mode).
❸
39