Datamax-O'Neil A-Class Mark II Operator’s Manual - Manual (Page 11)

A-Class Mark II 1
1
Overview
1.1 About the Printer
Congratulations on your purchase of an A-Class Mark II printer. This print engine (hereafter
referred to as “the printer” and, when necessary, by model) is designed for professional integration
into an industrial applicator system.
This manual provides all the information necessary for installation, setup and operation of the
printer. To begin printing, refer to the instructions provided with your label-creation software; or,
to write custom label programs, reference the Class Series 2 Programmer’s Manual on the
Accessories CD-ROM, also available at http://www.datamax-oneil.com
The printer’s model number, located on the Serial Tag affixed to the inside of the front cover,
should be used when referencing specific information within this manual.