Datamax-O'Neil A-Class Mark II Operator’s Manual - Manual (Page 12)

2 A-Class Mark II
1.1.1 Standard Features
This printer offers the following standard features:
• Right-handed or left-handed configurations
•
Electronics card cage
• 8 MB Flash downloadable program memory
•
16 MB DRAM memory
• User accessible memory for graphics, fonts, and label format storage
• Two RS-232 serial interfaces (one of which is also RS-422/RS-485 capable)
•
One IEEE 1284 compliant parallel interface
• One Ethernet 10/00 interface
•
One USB v1.1 interface
• A programmable GPIO Port
• Backlit graphics display
•
EFIGS (English, French, Italian, German, and Spanish) display languages
• Industry standard bar code symbologies
•
Time stamp at print capability with time and date battery back-up
• Static brushes
•
Printhead resistance verification
• Configurable fault-handling capability with reprint and void selections
• Parse error-tolerant command language interpretation
•
Internal test labels for verification, validation, and configuration
• Multiple setup restore capability
•
Paper retract control after print
• Ribbon low detection and warning
• Power-up, mode, and resident option hardware diagnostics
•
Option hardware auto-detection
• Media peel bar
•
Media inch counters
• Line mode (ASCII text input) capability with USB Host
• Firmware upgrades downloadable
•
AGFA Scaleable Font Engine featuring dynamic font attributes