Datamax-O'Neil A-Class Mark II Operator’s Manual - Manual (Page 42)

32 A-Class Mark II
4.2 The System Menu
The System Menu is composed of seven menu branches:
MEDIA SETTINGS
PRINT CONTROL
PRINTER OPTIONS
SYSTEM SETTINGS
COMMUNICATIONS
DIAGNOSTICS
MCL OPTIONS
To enter the System Menu, press the Menu Soft Key.
(This places the printer in Menu mode, taking it offline, halting the processing of new data.)


Prompts may appear before menu access is granted or before changes are enacted;
see Section 5.1.1.

MENU MODE controls the access level; see Section 4.2.4.

Host software commands may, in some cases, override menu settings; see Section
4.2.5.

Depending upon the firmware and options, some menu items may not be present or
may indicate NOT INSTALLED.

In the descriptions below “” denotes a firmware default setting, while “ ” denotes a
setting only modifiable via the menu.