Datamax-O'Neil VMP-2000 Installation Guide - Manual (Page 13)

11
Input Power and Connection Requirements
Datamax-O’Neil VMP-2000 Installation Guide
Once connected, use a volt meter to ensure that the center pin on the DC jack is positive (+)
12 volts and with specifications for input voltage.
Cigarette Lighter Adapter
(part # 510116-000)
You can connect the cigarette lighter adapter to any universal 12 volt cigarette lighter plug.
If you want the printer to operate when the vehicle is turned off, make sure the cigarette
lighter adapter is powered when the vehicle power is off. If the printer does not operate from
the cigarette lighter adapter, check the fuse. You can replace the fuse with a Bussman 250
volt 7 amp fuse.
Note: DO NOT connect to the printer if the center is not positive 12 volts. You will damage
the printer.
Cigarette Lighter Adapter
Cigarette Lighter Adapter Fuse