Datamax-O'Neil VMP-2000 Installation Guide - Manual (Page 5)

3
Mounting Options
Datamax-O’Neil VMP-2000 Installation Guide
Mounting Options
The following options are available for mounting the VMP printer:
• Integrated dash mount
• Wall mount
• Horizontal mount
• Other
See the brief descriptions below for the scenario which best describes your mounting needs.
Each bracket comes with vibration dampening hardware to aid in the life of your printer.
To obtain additional information about the mounting brackets, contact your salesperson or
call (949) 458-0500.
Integrated Dash Mount
The VMP-2000 can be mounted using the VMP Dashmount Kit, which includes an integrated
paper supply tray, vibration bracket and a universal cradle mount bracket. The Dashmount
Kit works where there is adequate area to support and mount the kit. The kit is designed to
either work in a vehicle or on a desktop. Please review the specific instruction sheets for
assembly and installation of the VMP-2000 Dashmount Bracket kit (part # 110092-xxx).
Note: The following instructions apply to the VMP-2000 printers only. Contact Datamax-
O’Neil customer service for installation information on the VMP-1000 printers.
VMP Dashmount Bracket
(Part # 220151-100) VMP Cradle Bracket Kit
(Part # 220153-000)