Power supply, Requirements, Guidelines – Datamax-O'Neil VMP-2000 Installation Guide User Manual
Page 15
13
Data Connection
Datamax-O’Neil VMP-2000 Installation Guide
Power Supply
The VMP can run solely from a power supply. For more information, see Input Power and
Connection Requirements on page 8. Use only the Datamax-O’Neil approved power supply.
Requirements
•
Use the Datamax-O’Neil recommended power supply. FAILURE TO USE A DATAMAX-
ONEIL WILL RESULT IN DAMAGE TO THE PRINTER OR THE PRINTER WILL NOT
OPERATE PROPERLY.
Guidelines
•
Do not install cables or connections near wet areas.
•
Do not install cables near, or around, sharp edges.
•
Do not install cables near heat sources.
•
Do not install cables at “pinch locations” (for example, near doors or under a seat).
Note:
The operating temperature of this portable printer is 50° C. However, the operating
temperature when used with Datamax-O’Neil power supply for charging the portable
printer is limited to 35° C. Please charge the printer in a suitable location that meets this
temperature requirement.
Power Supply