Operating the appliance, Starting the heat pump, Shutting down the heat pump – DE DIETRICH ALEZIO AWHP-V220 User Manual

Page 16: User settings, 4 operating the appliance, 1 starting the heat pump, 2 shutting down the heat pump, 3 user settings

Advertising
background image

4 Operating the appliance

4.1

Starting the heat pump

WARNING

Only a qualified professional may carry out initial start up

or a start up when the heat pump has completely stopped.

When the appliance is switched on, the control panel indicates its

operating mode:

Screen display Operating mode
r

4

Heating and domestic hot water

4

Swimming pool and domestic hot water

4

Heating

4

Pool

r

+ D

Domestic hot water

w

+ r

Cooling and domestic hot water

w

Cooling

/

Shutdown/Frost Protection

To modify the operating mode, see chapter:
¼ "Changing the operating mode", page 17.

4.2

Shutting down the heat pump

WARNING

It is recommended that the heat pump never be completely

shut down.

Antifreeze protection is no longer guaranteed

automatically if the mains supply is switched off.

If the central heating and the DHW tank are not used for a long period,

we recommend putting the heat pump in shutdown/frost protection

mode.
¼See chapter: "Changing the operating mode", page 17.

In this mode, the installation’s antifreeze protection remains active.

4.3

User settings

If no buttons are pressed, the settings menus are exited

automatically after 10 seconds, without saving the

parameters.

4. Operating the appliance

AWHP-V220

15

23/04/2013 - 300026802-001-03

Advertising