2 incidents and solutions, 1 the burner is not working, The burner is not working – DE DIETRICH ECODENS DTG 1300-24 ECO _ V-130 User Manual
Page 13
Advertising
13
11/09/09 - 300010111-001-B
DTG 1300-24 Eco / V130
6. Troubleshooting
6.2 Incidents and solutions
Checks to make before calling your fitter
6.2.1
The burner is not working
It is cold.
- Check the boiler thermostat settings.
- If using a room temperature thermostat or a remote control
(Easymatic or Easyradio), check that it is set according to the
instructions.
.
It is cold. There is no domestic hot water
- Note the code displayed AL + _ _.
- Press button Q
until the red light goes out.
- Release the button. The boiler restarts.
- If there is a problem, contact your fitter, specifying the alarm code.
Advertising