DE DIETRICH MIT-II-E, MIT-II-H, MIT-EP, MIT-HP and QUADROPAC DUP 500 - Manual (Page 8)

8
MIT-II - MIT/P - QUADROPAC DUP 500 14/04/2010 - 300015090-001-L
Brief touch Several brief touches 1 long touch (5 seconds)
AUTO key Depending on the situation:
- Cancellation of the Daytime or
Nighttime mode
- Confirmation of the antifreeze
setting (or after 2 minutes) _ Cancels the message SHOW REM.
CTRL which signals the presence of an
override on a remote control.
The AUTO mode is forced on all
existing heating circuits.
Key % / $ Temporary activation (Until midnight)
The arrow above the key flashes. _ Permanent activation
The arrow above the key is steady.
Key . Temporary activation
Set the number of days' absence
(current day = 1) using keys
and
(up to 99 days).
The arrow above the key flashes.
Cancellation: The antifreeze mode is
cancelled when the number of
antifreeze days is reset to zero or when
the set time has elapsed.
Deferred temporary activation:
- First brief touch: Set the number of
days' absence (current day = 1) using
keys
and (up to 99 days).
- Second brief touch: Set the start
month using keys
and .
- Third brief touch: Set the start day
using keys
and .
The arrow above the key flashes until
the start day and then becomes steady.
Cancellation: The antifreeze mode is
cancelled when the number of
antifreeze days is reset to zero or when
the set time has elapsed
.
Permanent activation
The arrow above the key is steady.

The permanent "antifreeze"
mode can also be selected
using the TELCOM 2 remote
voice monitoring module
delivered as an option.
Key  Temporary activation (Until midnight)
The arrow above the key flashes. Second depression: Deactivation Permanent activation
The arrow above the key is steady.
Key # (Located
under the flap)
_ _ First press: Permanent activation
The heating is off.
The symbol SU appears.
Second depression: Deactivation