eLine Technology SIP_NVMS - Manual (Page 31)

Network Video Manager System
-30-
Select "Enable PTZ", Click "PTZ alarm settings" can be set to trigger alarms when the PTZ preset position and name.
4. Motion Detection Alarm Configuration interaction
Note: Before the opening of the record, we must first configure the "Local Record""Record Policy" parameter.
Options need to configure the camera ID number, can be configured to detect movement of the camera to trigger the
alarm when the linkage. Including whether the alarm output and whether or not such as the opening of PTZ.
First of all, select "Enable Motion Detection", then click on the "Time Setting" set the camera to detect movement of the
deployment time,