eLine Technology SIP_NVMS - Manual (Page 49)

Network Video Manager System
-48-
want to visit the IP Camera Host IP address, click the enter key (ENTER), the login dialog box enter the correct user
name and password to access the IP Camera equipment .IP Camera equipment default user name and password are
admin, case-sensitive.
8. IP Camera equipment how to WAN connectivity and access?
 IP Camera equipment can be PPPoE dial-up to connect to the WAN network, to support the DDNS to visit.
 First IP Camera LAN connectivity through the equipment, "network services" within the PPPoE and DDNS
(www.3322.org Sign up for a free domain name) configuration parameters. After the success of the application
parameters, need to restart only after the dial-up equipment.
 Open the IE browser directly in the address bar enters the DDNS domain name server address to access IP Camera
equipment. Enter the correct user name and password to enter the parameter setting interface of the IP Camera, in the
"device configurationADSL network" can query WAN equipment IP Camera Network IP. If you need to visit the client
IP Camera equipment, the client only needs to manually add the device with address normal visit.
 IP Camera、Computer and ADSL modem can be connected together with switches. Diagram is as follows:
ACT ACT 10M100M 1 2 3 4
13 14 15 16
5 6 7 8
17 18 19 20
9 10 11 12
21 22 23 24
UPLINK
1 2 3 4 5 6 7 8 9 101112
131415161718192021222324 COL COL
PWR
SWITCH
IP Camera
PC
ADSL modem
Fast Ethernet Switch
RS CS TR RD TD CD TALK / DATA TALK
9. Why through the client program to connect to the device, the monitor screen in real-time image quality is
unsatisfactory?
 IP Camera equipment connected to the default resolution is CIF, Variable bit rate (VBR), the quality of 5 (the quality of
1-7 from low to high), through the bottom of the client video quality adjustment function to change the resolution and
quality.
 Resolution from low to high, including the four: Super Low Bitrate QCIF、Low Bitrate CIF、Low Bitrate D1 and High
Bitrate D1.
 Bit rate including the two: VBR (Variable bit rate) and CBR (Fixed bit rate).VBR quality is 1-7 of them from low to high.
10. SD card support hot-plug it？
 Support, but the devices are advised to avoid the use of hot-plug SD cards, avoid data loss.
11. SD card can not be used, how should I do?
 Please check whether the partition SD card, if there was no partition on the first partition in the PC operation.
 Used for the first time will be automatically formatted SD card, make sure that the SD has been the backup data.