eLine Technology SIP_NVMS - Manual (Page 32)

Network Video Manager System
-31-
Require the deployment of the week, and set the beginning and ending days of deployment time, click the "Add" button,
click "OK" button.
Click on "Detection of regional Configuration":
Area Motion: Press and hold the left mouse button on the video in order to facilitate the sliding region configured to detect
regions, when the need to remove the detection region can click the right mouse button. The most mobile region can not
detect more than eight.
Area mask: Hold down the left mouse button within the region to add a mask area, when the need to remove the mask
area, you can click the right mouse button.
Note: The maximum number of areas is 8.
Select "Enable PTZ", click on the "Alarm PTZ settings" can be set to trigger alarms when the PTZ preset position and
name.
2.4.2.5 Local record
Local recording settings is the SD card and NAS video parameters.Once configured, the device can record video directly to an
SD card and NAS.
1. Record Policy