FlexLink Configura - Manual (Page 40)

several print frames, and want to print them all, check the radio button All print
frames.
12. Check the Frame box to add a black frame around the drawing on the printout.
13. In the Copies field, enter the number of copies you want to print.
14. If you want to see in advance what the printout will look like, click on Preview button.
15. If you are happy with the result, close the preview and click on Print.
The space between the two lines is for the company’s logo and other details.
16. When the printer setup for the frame is done and you have confirmed with OK or
Apply, a blue inner frame appears inside the black solid one. Now you can clearly see
where the drawing header is. Make sure that the whole drawing is inside the blue
frame - objects placed outside will not appear on the printout.
17. After you have placed and activated the frame on the drawing area and done your
printer setup in the Print Frame Settings dialog, you can also close the dialog and
print out the drawing in the usual way by going to the Print menu or by clicking on the
icon in the toolbar.
18. To be able to select the alternative Selected print frame in the Print Settings
dialog, the frame on the drawing area must be activated. You activate a frame by
clicking at the very edge of the frame, between the blue dotted line and the black solid
one.
19. To move the print frame on the drawing area, click between the dashed blue line and
the black line, and drag the frame.
20. You can also set the drawing scale by stretching the print frame. Click on one of the
three snap points on the right-hand side of the frame, hold down the mouse button
and drag the frame until it is the size you want.
40
© Copyright Configura Sverige AB 2004. All rights reserved. Reproduction, copying or distribution to a third party is prohibited unless
consent in writing has been given by the owner.