Brooks Instrument SLA5800 Series - Manual (Page 46)

3-14
Brooks ® Digital MFC's & MFM's
Section 3 Operation
Installation and Operation Manual
X-TMF-SLA5800-MFC-eng
Part Number: 541B027AAG
April, 2013
3-8-8 Flow Signal Lock-in
When this feature is enabled, the Flow Out signal will “lock-in” to the
setpoint value whenever the error between measured Flow and Setpoint is
less than a configurable value.
3-9 PC-based Support Tools
Brooks Instrument offers a variety of PC-based process control and service
tools to meet the needs of our customers. SmartDDE may be used with any
unit supporting RS-485 in a multidrop configuration, thus allowing users to
control and monitor their Brooks devices. The Brooks Service Suite (Analog
I/O versions only) may be used to monitor, diagnose, tune and calibrate
Brooks devices. The Brooks Service Suite interfaces with Brooks products
via a special service port. The Brooks Service Tool (BST) may be used for
devices equipped with digital communications to perform many of the same
tasks as the Brooks Service Suite.