Burkert Type 8611 - Manual (Page 96)

96
FunctionsoftheConfigurationLevel
12.22. END - leaving the configuration level
Press the ENTER key in the END menu option to leave the configuration level. After that, the controller is once
again at the process operating level and in the AUTOMATIC operating state (see chapter “9.2.1. Switching
between the operating levels and operating states”).
If the arrow keys are pressed, the controller remains at the configuration level and switches to the next or the pre-
vious menu option.
END
MODE
.
.
.
B_xx
switching to the process operating level
AUTOMATIC operating state
Menu selection
of the
configuration level
Figure 72: END; Leaving the configuration level
english
Type 8611