Burkert Type 8694 - Manual (Page 22)

22
Start-up
10.3.2. Functions of the keys
The configuration of the 2 keys on the board varies depending on the
operating status (AUTOMATIC / MANUAL).
1 2 3 4
ON DIP
Communications
interface
LED 1
LED 2
DIP switches
Key 1
Key 2
Fig. 16: Keys
MANUAL operating status (DIP switch 4 set to ON):
Key Function 10)
1 Aerate (manually open / close the actuator) 11)
2 Deaerate (manually open / close the actuator) 11)
Tab. 8: Configuration of the keys for MANUAL operating status
AUTOMATIC operating status (DIP switch 4 set to OFF):
Key Function
1 Press for 5 s to start the X.TUNE function
2 -
Tab. 9: Configuration of the keys for AUTOMATIC operating status
10)
No function if the binary input was activated with the “Manual/Auto
change-over” via the communications software.
11)
depending on the operating principle of the actuator.
english
Type 8694