Burkert Type 1094 - Manual (Page 18)

16 - 1094_400
english
There are six operator modes, that differ by the extent of their functions::
• Flow Meter
The unit is used as independent flow meter. Only the gas meter has to be
connected.
• PRTother (Version C)
The unit is used to control the vapor recovery. Only the gas meter has to
be connected. A protocol can be printed.
• Check-1094
Control functions for vapor recovery are possible.
• Service
All the required setting and control operations can be carried out.
• Evaluation
Additional data is displayed.
• PRT-1094 (Version C)
The unit is used to control the vapor recovery. A protocol can be printed.
6.3 Operator Modes
NOTE The following operating modes require the connection to a
control electronics, compatible to the BUERKERT-device type
1094.
6.4 Selection of the Operator Mode
Switching on the hand held terminal
Selecting the operator mode
Confirmation
ENTER
NOTE Without the connection of of a control electronics only the
operator modes "Flow meter" and "PRTother" are possible.