Burkert Type 1150 - Manual (Page 61)

1150 - 59
C
ONFIGURATION
Controller 1 (2 to 4) / Self-optimization
Value / selection Description
Method
Oscillation
Step response One of two procedures can be selected for self-optimization.
(see Chapter Optimization)
Self-optimization
Enabled
Inhibited If the function is inhibited, self-optimization cannot be started from the keys or the
logic input..
Output 1 for "Tune"
Relay + logic
Solid-state
Analog
The type of the physical output for the signal of the controller output 1 has to be
defined.
Output 2 for "Tune"
Relay + logic
Solid-state
Analog
The type of the physical output for the signal of the controller output 2 has to be
defined.
Steady output
- 100 to 0 to + 100 % Initial output level with step response
Step size
10 to 20 to 100 % Step size with step response