Burkert Type 1150 - Manual (Page 71)

1150 - 69
C
ONFIGURATION
Logic functions
Functions are assigned here to the logic signals of the logic inputs, limit
comparators and logic functions (formula).
In addition, the functions for control contacts, tolerance band signal and program
end signal are defined for program controllers/generators.
In the case of the fixed-setpoint controller, the ramp end signals can have functions
assigned.
Configuration
Analog inputs
Controller
Generator
Limit comparators
Outputs
Logic functions
Math / logic
C-level
Display
Interfaces
Device data
Recording
Switching Action
Edge-triggered functions
The logic function reacts to switch-on edges.
The following functions are edge-triggered:
• Start/stop of self-optimization
• Acknowledgement of limit comparators
• Program start/stop/cancel
• Segment change
The functions are arranged in two groups:
State-triggered functions
The logic function reacts to switch-on or switch-off states.
• All remaining functions