Burkert Type 8623 - Manual (Page 12)

10 - 8623-2 Standard
english
5.2 Changing the cable outlet direction
➔ ➔ ➔ ➔ ➔ Unscrew the 4 screws on the front panel of the
flow controller and remove the cover carefully.
➔ ➔ ➔ ➔ ➔ Remove the screw to the valve and remove the
plastic cross.
➔ ➔ ➔ ➔ ➔ Detach the plate from the cube.
➔ ➔ ➔ ➔ ➔ Pull out the cube downwards and replace in the
desired orientation.
➔ ➔ ➔ ➔ ➔ Place the plate onto the cube (the pins must
engage in the guides).
➔ ➔ ➔ ➔ ➔ Lay on the plastic cross and insert the screw
through the cube.
➔ ➔ ➔ ➔ ➔ Connect the flow controller to the proportional
valve (see 5.1).
Fig.: Changing the cable outlet direction