Burkert Type 8020 - Manual (Page 10)

36
danger
risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident preven-
tion and safety relating to the use of aggressive fluids.
Warning
risk of injury due to non-conforming maintenance.
• Maintenance must only be carried out by qualified and
skilled staff with the appropriate tools.
• Ensure that the restart of the installation is controlled
after any interventions.
cleaning
note
the device may be damaged by the cleaning liquid.
• Clean the device with a cloth slightly dampened with
water or a cleaning liquid compatible with the materials
the device is made of.
English 37
cleaning the flow sensor
note
the flow sensor may be damaged by the cleaning
liquid.
• Use a cleaning product that is compatible with the
materials the flow sensor is made of.
• Do not use any abrasive acting materials.
note
After cleaning the flow sensor:
• Rinse the flow sensor.
• Check the seal and replace it if necessary.
English 37
38
9. Accessories
attention
risk of injury and/or damage caused by the use of
unsuitable parts.
Incorrect accessories and unsuitable spare parts may
cause injuries and damage the device and the sur-
rounding area.
• Use only original accessories and original spare parts
from Bürkert.
Accessories order code
Female connector with cable gland (type
2508)
438811
Female connector (type 2509) with NPT
1/2’’ reduction, without cable gland 162673
Set with seals (1 FKM + 1 EPDM) 552111
English 39
10. pAckAGinG, TrAnsporT
attention
damage due to transport
Transport may damage an insufficiently protected device.
• Transport the device in shock-resistant packaging and
away from humidity and dirt.
• Do not expose the device to temperatures that may
exceed the admissible storage temperature range.
• Protect the electrical interfaces using protective plugs.
11. sTorAGe
attention
poor storage can damage the device.
• Store the device in a dry place away from dust.
• Storage temperature: -15 to +60°C.
English 39