Process conditions, Fluid temperature, Physical state – Fluid Components International CMU User Manual
Page 41: Viscosity, Fluid temperature limit, Flow rate limit, Pressure loss
10.3 Process conditions
10.3.1 Fluid
temperature
− 40 °C to + 260 °C (-40 °F to 500 °F)
The data sheet/rating plate of the connected transmitter must be observed.
10.3.2 Physical
state
Liquid product
(maximum density 2 kg/l (125lb/ft³))
Gaseous product
(minimum density 0.002 kg/l in operating state)
10.3.3 Viscosity
0.3 to 50,000 mPas (0.3 to 50,000cP)
The data sheet of the connected transmitter must be observed.
10.3.4 Fluid temperature limit
260 °C (500 °F)
The data sheet of the connected transmitter must be observed.
10.3.5 Flow rate limit
See sensor data sheet in Section 3.4.2 CMU flow ranges on page 15.
10.3.6 Pressure
loss
See sensor data sheet in Section 3.4.5 Pressure loss CMU on page 17.
CMU & CT OPERATING MANUAL
Part No 06EN003380 rev 1.6
Page 41 of 112