Fluid Components International CMU - Manual (Page 77)

13.6.12 Reference temperature
In order to calculate the reference density, the temperature to which the density relates is needed. The
temperature for fuel oil usually is 15 °C.
Ref. temperature
015.00 °C
The reference temperature will be displayed. As mentioned in Section 12.4.3.2 Input window/modify a
value, the operator can change the value.
13.6.13 Reference pressure
This function has been prepared for the consideration of gas equations for the measurement of reference
density and volume for gases. In this software version, it will be used for entering the process pressure
which is set equal to the reference pressure.
Ref. pressure
001.00 bar
The current value process pressure will be displayed in bar. As mentioned in Section 12.4.3.2 Input win-
dow/modify a value, the operator can change the value.
CMU & CT OPERATING MANUAL
Part No 06EN003380 rev 1.6
Page 77 of 112