Controls and wiring (continued) – GeneralAire ERV 3220 User Manual

Page 17

Advertising
background image

17

GeneralAire’s DC4E allows the homeowner control of the indoor humidity level by offering
four selections of operation. The controller allows the homeowner to select the humidity
percentage, fan speed, operation mode and cycles per hour.

The above controller have four wires connection. On the Duotrol

TM

System and DC4E use

R, G, B and W terminal connections on the lower right hand side of the control board.

DC4E

ELITE DEHUMIDISTAT

Features

• Dehumidistat to select the humidity level

• Speed Control (Off, Normal and Reduced)
• Mode Control (Intermittent and Continuous Ventilation)

• Cycles per hour (0/0, 20/40 and 30/30)
• Light On Override
• Maintenance Light Reminder

figure 14.7 DC4E

figure 14.8 Duotrol

TM

CYCLES

0
20/40
30/30

Allows the homeowner to select cycles per hour

Normal operation mode
20 minutes on high speed and 40 minutes on previously set mode of operation
30 minutes on high speed and 30 minutes on previously set mode of operation

MAINTENANCE

Light indicator:

14. Controls and Wiring (continued)

Shows homeowner when HRV or ERV needs to be maintain.

Advertising
This manual is related to the following products: