CAME BX-P Kit - Manual (Page 14)

14
A
ll t
h
e d
at
a a
n
d i
n
fo
rm
at
io
n c
o
n
ta
in
ed h
er
ei
n
i
s c
o
n
si
d
er
ed
s
u
b
je
ct to c
h
an
g
e a
t a
n
y t
im
e a
n
d a
t o
u
r d
is
cr
et
io
n
ENGLISH
#( #( !&
3) Repeat the procedure of parts 1 and 2 with the
“CH2” key, associating it wit another transmitter
key.
N.B.: if the code needs to be changed, repeat the
sequence described above.
CH2
T2
!&
#( #(
!&
Disconnect the 230V power and insert
the AF2 radio card (with the same
frequency used for AF1 card, ref. par.
7.1, pg.12) in the slot (ref. part 11, pg.
8), the motherboard recognises it only
when it is battery powered.
8.1 Preparation of the radio board (AF2)
8 Installation procedure for the remote control for automatically releasing the motor
(pratico system)
Before installation, read the procedures below:
- preparation of the radio board (paragraph 8.1);
- battery connection and memorization of the code on the control board (paragraph 8.2).
The “pratico system” automatically releases the automation through the radio transmitter.
In the absence of 230V power, pressing the key (the same one memorized for opening the gate) or with another key of the radio
transmitter, the electrical lock is activated, releasing the gearmotor and making it possible to manually open the gate.
After 15 seconds, the system relocks automatically.
Radio board (AF2)
Motherboard