CAME BX-P Kit - Manual (Page 17)

17
A
ll t
h
e d
at
a a
n
d i
n
fo
rm
at
io
n c
o
n
ta
in
ed h
er
ei
n
i
s c
o
n
si
d
er
ed
s
u
b
je
ct to c
h
an
g
e a
t a
n
y t
im
e a
n
d a
t o
u
r d
is
cr
et
io
n
ENGLISH
The unit does not require specifi c maintenance. Only as a precautionary measure and in case of intensive use, it is
opportune to periodically (every six months) check that the electric cables are in good condition and that the bolts and nuts are
tight, and oil the contact areas between the fi xed and mobile sliding pieces.
All checks must be recorded (in a dedicated record-book).
9 Maintenance
9.1 Periodic maintenance
9.2 Problem solving
THE GATE DOES NOT MOVE:
- check the 230V AC power on the terminals L-N;
- check the fuses;
- check the 24 V power on terminals 10-11;
- check the connection of the stop button; if not used, set the dip 9 to ON;
- check the safety device connection (partial stop); if unused, set dip switch 8 to ON
- check that the small access panel for blocking/release is closed.
THE GATE REMAINS IN THE OPEN POSITION:
- automatic closure disabled, see dip no.1;
- check all the command devices are working correctly;
- ensure that nothing is obstructing the safety devices;
- make sure all N.C. contacts are set to ON if not used.
10 Demolition and disposal
In its premises, CAME CANCELLI AUTOMATICI S.p.A. implements an Environmental Management System certifi ed in
compliance with the UNI EN ISO 14001 standard to ensure environmental protection.
Please continue our efforts to protect the environment which CAME considers one of the cardinal elements in the development of
its operational and market strategies simply by observing brief recommendations as regards disposal:
DISPOSAL OF PACKAGING – The packaging components (cardboard, plastic, etc.) are all classifi able as solid urban waste
products and may be disposed of easily, keeping in mind recycling possibilities.
Prior to disposal, it is always advisable to check specifi c regulations in force in the place of installation.
PLEASE DISPOSE OF PROPERLY!
PRODUCT DISPOSAL – Our products are made up of various types of materials. Most of them (aluminium, plastics, iron,
electrical wires, etc.) may be disposed of in normal garbage collection bins and can be recycled by disposing of in specifi c re-
cyclable material collection bins and disposal in authorized centres. Other components (electrical boards, remote control batteries,
etc.), however, may contain polluting substances. They should therefore be removed and given to qualifi ed service companies for
proper disposal.
Prior to disposal, it is always advisable to check specifi c regulations in force in the place of disposal.
PLEASE DISPOSE OF PROPERLY!
11 Manufacturer’s warranty
MANUFACTURER’S DECLARATION
As per Enclosure II B of Machinery Directive 98/37/CE
Enclosed with the technical documentation (the original copy of the Declaration is available on request) Date of the present declaration 07/12/2001
The representatives of
CAME Cancelli Automatici S.p.A.
via Martiri della Libertà, 15
31030Dosson di Casier - Treviso - ITALYtel
(+39) 0422 4940 - fax (+39) 0422 4941
internet: www.came.it - e-mail: [email protected]
Hereby declare, under their own respons ibility, that the product/s called ...
… comply with the Italian National Legal Provisions that transpose the
following Community Directives (where specifi cally applicable):
M ACHINERY D IRECTIVE 98/37/CE
L OW V OLTAGE D IRECTIVE 73/23/EEC - 93/68/EEC
L ECTROMAGNETIC C OMPATIBILITY D IRECTIVE 89/336/EEC - 92/31/EEC
R&TTE D IRECTIVE 1999/5/CE
Also, they furthermore represent and warrant that the product/s that are the subject of the present Declaration
are manufactured in the respect of the following main harmonized provisions:
EN 292 PART 1 AND 2 M ACHINERY SAFETY .
EN 12453 I NDUSTRIAL , COMMERCIAL AND OTHER CLOSING MECHANISMS .
EN 12445 I NDUSTRIAL , COMMERCIAL AND OTHER CLOSING MECHANISMS .
EN 12978 S AFETY DEVICES FOR POWER OPERATED DOORS AND GATES ....
EN 60335 - 1 S AFETY IN APPARATUSES FOR HOME USE .
EN 60204 - 1 M ACHINERY SAFETY .
EN 61000 - 6 - 2 E LECTROMAGNETIC C OMPATIBILITY .
EN 61000 - 4 - 4 E LECTROMAGNETIC C OMPATIBILITY .
EN 61000 - 4 - 5 E LECTROMAGNETIC C OMPATIBILITY .
IMPORTANT CAUTION!
It is forbidden to market/use product/s that are the subject of this declaration before completing and/or
incorporating them in total compliance with the provisions of Machinery Directive 98/37/CE
Signatures of the Representatives
TECHNICAL MANAGER
Mr. Gianni Michielan
MANAGING DIRECTOR
Mr. Paolo Menuzzo
BX-P
R001 - BSF - BRC5 - BRC10 - BRC15 - B4337
CGZ - CGZS - CCT - CGIU