Clear-Com FreeSpeak Beltpack - Manual (Page 20)

Clear-Com Communication Systems
Eclipse Wireless Communication System
1 - 2
adjusted using the two push-to-talk knobs, so that one conversation
can be monitored in the background while a primary conversation is
held.
The front-panel display contains the name (label) of the beltpack user,
identifies the two talk/listen labels currently selected by the user, and
gives other information such as signal strength and battery level.
Figure 1-2: Beltpack Display
A 4-pin male headset connector is provided for connection with a
standard Clear-Com headset or similar. The Eclipse beltpack will
operate for up to 8 hours on four AA alkaline or rechargeable NiMH
batteries.
BELTPACK TOP CONTROL SECTION
Figure 1-3: View of Top of Beltpack
Any or all of the beltpack’s six
audio routes may be kept
open while you talk or listen
on the beltpack.