Clear-Com FreeSpeak Beltpack - Manual (Page 69)

Clear-Com Communication Systems
Eclipse Wireless Communication System 5 - 1
SPECIFICATIONS
Eclipse Beltpack
Beltpack Frequency Response 100 Hz – 7.1 kHz
Beltpack Assignment-Select Buttons 3, used to scroll and select talk/listen
“pages”
and also to edit beltpack menu options
“Label” Assignments per Select Button2 (two simultaneous talk/listen paths or
channels)
Number of Full-Duplex Audio Paths 6 (3 pairs), with individual level control
Level/Talk Controls 2 top-mounted push-to-talk rotary
encoders
Headset Connector 4-pin male, Clear-Com standard
Headset Impedance 32 ohm to 2000 ohm
Microphone Type Dynamic or electret, selectable in
beltpack
menu
Microphone and Headset Limiters Selectable in beltpack menu
Powering Alkaline Battery, 4 AA alkaline cells
Rechargeable, 4 NiMH cells in AA format
Battery Charging In unit, via supplied external power
supply
connected to beltpack
Battery Life Approximately 8 hours with 4 fresh AA
alkaline batteries or 4 AA high-amperage
NiMH cells
Range from Single
Transceiver/Antenna
125 m from transceiver/antenna in
line-of-sight conditions; 50 m indoors;
use
multiple transceiver/antennas for larger,
custom coverage areas
5