Clear-Com Tempest2400 User Manual

Tempest, 2 -channel quickstart guide, What’s in the box basestation

Advertising
background image

What’s in the box

BaseStation

•

CM-222 series BaseStation

●

Power Cord

●

2dBi Omni-directional whip antenna

●

3.5mm to 3.5mm 3 conductor data pairing cable

» Used to pair a BaseStation to the BeltStation(s)

●

USB-A to USB-B cable

» Used to update BaseStation fi rmware

●

USB-A to Mini-USB

» Used to update BeltStation fi rmware

●

BaseSync cable

» Used if you have more than one BaseStation

●

Improves RF performance when using multiple systems

●

CD with manual, T-Desk software

BeltStation

●

CP-22 2 series BeltStation

●

Li-Poly rechargeable battery

●

5VDC wall charger with Mini USB connector

Remote Transceiver (optional)

●

Remote RF transceiver

●

RJ-45 to RJ-45 CAT-5 cable

●

2dBi Omni-directional whip antenna (x2)

●

Mounting Plate and screws

Directional Antenna Kit (optional)

●

Directional antennas (x2)

●

Mounting brackets (x2)

●

Antenna Mounting Bar

●

“C” Clamp Mount

●

“RP-TNC” to “N” cables (x2)

What else you may need

●

Headset, one for each user

» May be dynamic or electret microphone, with a 4-PIN

XLR female connector

●

3-PIN XLR cables to connect to external 2-Wire Intercom
system

●

RJ-45 cables to connect to external 4-Wire Intercom
system

●

RJ-45 cable to connect to PC for T-Desk LAN control

5 Bay Battery Charger (optional)

●

Battery Charger

●

AC Cable

Note: Charge ALL BeltStation batteries prior to set-up.

Tempest

®

2400

81051 9Z Rev C

2 -Channel QuickStart Guide

Advertising