Battery operation – Clear-Com BS200 User Manual
Page 21
Advertising
Battery Operation
Battery cover
release latches
If using the WS200 with battery power ―
• Press down and pull out on the two battery cover
release latches and lift the cover to open the
battery compartment.
• Insert six AA batteries into the battery sled, in the
positions shown inside the sled, and install the sled in
the battery compartment.
Battery
compartment
Battery
sled
Battery sled
with batteries
NOTE: An HME BAT850 Rechargeable
NiMH Battery can be used instead.
• Close the battery compartment by pressing
down on its cover next to both of the latches
at the same time until they snap in place.
16
Advertising
This manual is related to the following products: