Connect a dual monitor, Connect optional devices, Figure 13 – Hach-Lange POLYMETRON 9610 sc SiO2 Operations User Manual
Page 15
Advertising
Figure 13 Power connection
Connect a dual monitor
An external sc controller can connect to the analyzer. Connect a Hach
cable 6789400 to the external sc controller and the dual monitor
connection of the analyzer. Refer to
on page 13.
Connect optional devices
Install the cables for output or input devices as shown in
.
Make sure to use the wire gauge that is specified for the connection.
Refer to
on page 3. To configure a device, refer to the
operations manual.
English 15
Advertising
This manual is related to the following products: