Hach-Lange POLYMETRON 9610 sc SiO2 Operations - Manual (Page 18)

Install the analyzer bottles
C A U T I O N
Chemical exposure hazard. Obey laboratory safety procedures and
wear all of the personal protective equipment appropriate to the
chemicals that are handled. Refer to the current safety data sheets
(MSDS/SDS) for safety protocols.
Refer to Figure 16 to install the analyzer bottles. Make sure to identify all
bottles and put the applicable cap on the applicable bottle.
Figure 16 Analyzer bottle installation
Install the stir bar
A stir bar is included in the installation kit. Prior to the installation,
remove the funnel cover, funnel and colorimeter cover. Refer to
Figure 17 . Install the stir bar in the sample cell of the colorimeter as
shown in the illustrated steps. Refer to Figure 18 .
Figure 17 Colorimeter cover and funnel removal
18 English