Hach-Lange LICO 690 User Manual - Manual (Page 43)

43
Standard programs
2. Press AQA Log.
A listing of the stored data is displayed.
3. Press Filter: On/Off.
4. Activate On.
5. Select a required parameter.
6. Press OK to confirm the selection.
The chosen items are listed.
7. Press Options > Control Chart.
The measured standard concentrations are displayed
graphically with the control limits and date.
5.3.3 Data log (only LICO 690)
Measurement results from the photometric measurements of
single and multi-wavelengths can be found under Recall Data
Data Log.