Hach-Lange LICO 690 User Manual - Manual (Page 92)

92
Advanced Operations
6.1.5 Instrument backup
Prior to the next service date, the "Instrument Backup" offers
the opportunity to store all programs, measurement data, user
IDs, passwords, as well as all adjustable data on a USB stick.
1. Press Instrument Backup in the "System Check" menu.
2. Insert the USB stick (refer to section 3.5, page 16 ).
3. Press Store to start a Backup.
If the file was stored, the message "Instrument Backup is stored"
will be displayed.
4. Press OK to return to the "System Check" menu.
Restore backup data:
Note: All current data will be overwritten when restoring the Backup file!
1. Press Instrument Backup in the "System Check" menu.
2. Insert the USB stick with the backup (refer to section 3.5,
page 16 ).
3. Press Restore to pass back the data.
4. The report "Restore instrument backup from S/N XXXXXXX.
"Restore?" displays the serial number of the instrument
relating to the backup. Press OK to confirm.
5. Restart the instrument after the backup is complete.