Installation, Si628 c (wall mount), Danger – Hach-Lange SI628 C User Manual
Page 11: Assembly wall mounting, Pipe or column mounting, English
7
3. Installation
ENGLISH
3.1. si628 C (wall mount)
DANGER
Only qualified personnel should conduct the tasks described in this section of the manual.
3.1.1. Assembly
Wall mounting
Open the case by unscrewing the 4 A screws.
For wall mounting of the instruments, use the B drill holes indicated on the scheme.
Pipe or column mounting
Use the pipe adaptor, PN LZU9120.99.
Install the pipe adaptor on the rear part of the instrument using both C drill
holes as indicated on the figure. Fit the unit with two clamps to the column.
C
C
Cable
tie
Rear view
Pipe adaptor
Instrument mounted
B
50 mm
2 in
50 mm
2 in
25 mm
1 in
25 mm
1 in
115 mm
4.5 in
A
Front view
Side view
Rear view
si628 C_HACH LANGE_Ed. 0510.indd ANG:7
si628 C_HACH LANGE_Ed. 0510.indd ANG:7
20/5/10 11:08:41
20/5/10 11:08:41