Hach-Lange H-Series Meters Basic User Manual User Manual
Page 3
Table of contents
on page 3
on page 3
on page 5
on page 9
on page 11
on page 13
on page 14
on page 15
on page 17
Additional information
Additional information is available on the manufacturer's website.
Specifications
Specifications are subject to change without notice.
Specification
Details
Dimensions (W x D x H) Handheld meters: 9 x 20 x 5 cm (3.5 x 8 x 2 in.)
Benchtop meters: 20 x 13 x 8 cm (5 x 8 x 3 in.)
Weight
Handheld meters: 1300 g (3.0 lb.)
Benchtop meters: 900 g (2.0 lb.)
Battery enclosure
Water resistant
Battery requirements
4-ANSI 15 A or IEC-LR6 (AA Alkaline)
Power consumption
Backlight on and Bluetooth
™
active: 1 W
Backlight on and Bluetooth
™
inactive: 50 mW
Power source
Internal power source: 4 AA alkaline or rechargeable nickel metal hydride (NiMH)
batteries; battery life: > 200 hours
External power source: 100 to 240 VAC, 50/60 Hz input; 4.5 to 7.0 VDC; 100 mA
(benchtop meters only)
Storage temperature
–20 to +40 °C (4 to 140 °F)
Operating temperature
5 to 40 °C (41 to 104 °F)
Operating humidity
Relative humidity: 50% maximum at 25 ºC (77 ºF), non-condensing
Input connectors
Handheld meters: 8-pin ISFET, BNC with phono jack temperature, 12-pin conductivity
(H170G only)
Benchtop meters: 8-pin ISFET BNC with phono jack temperature, 12-pin conductivity
(H270G only), 2 mm reference, USB and external AC
USB adapter
Peripheral
Data memory (internal)
Up to 999 measurement results at user selectable intervals from 1 to 1999 seconds
Data storage
Automatic in store mode; user enables data logging mode; data is user stored, recalled
and deleted
Data export
USB connection to PC; transfer the data log or as data is read
Languages
English
Temperature correction
Off, automatic and manual (parameter dependent)
Measurement
Continuous measurement
Protection rating
Handheld meters: IP67
Benchtop meters: IP42
Certifications
CE
English 3