3 use of the light shield for measurements – Hach-Lange DR2800 eco User Manual
Page 17
Advertising
17
Installation
3.5.3 Use of the light shield for measurements
The light shield (
) prevents light interference
when using 13 mm barcode tests and must be in place before
measurements can be taken in cell compartment #1. The light
shield is required only when using 13 mm barcode tests.
The DR 2800 is shipped with the light shield installed. Remove the
light shield before using cell compartment #2. The light shield can
be stored in the Protective Cover (
)
Figure 5 Light Shield
Advertising