Hach-Lange DR2800 eco - Manual (Page 62)

62
Standard Operations
5.5.8.2 Edit/delete of barcode-readable application
To edit a barcode-readable application:
1. Press Stored Programs in the Main Menu and select a
program.
a. Press Program Options and then Edit.
b. Insert the LCW 906 cuvette, press Options>More>Edit.
2. A data overview of the corresponding application is displayed.
3. Highlight the corresponding line in the data overview and press
Edit.
General advices regarding the programming respectively updating
of program data, see
section 5.5.6 on page 56 and section 6.1.2 on
page 76 .
To delete a barcode-readable application:
1. Press Stored Programs in the Main Menu and select a
program.
2. Press Program Options and then Delete.